04-20-2020 02:22 PM
Does anyone have any idea if it possible to upload a driver or any information on how to make my printer print on both sides automaticallyor Must I buy a new printer to do this? Please advise.
05-05-2020 06:20 PM
Hi 1magicalstaR,
Unfortunately, the G4210 is unable to automatically print on both sides. The printer does not have a mechanism in the paper feed that will flip the paper over to print on the other side. The only way to duplex would be to print on one side and then reload the paper to print on the other side.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.