01-24-2021 01:36 PM
We are having an issue with our Pixma G4200 as it is skipping lines of print throughout the page. We have run the nozzle cleaning programs several times without success. I have attached a couple of examples for reference.
Thanks for any suggestions.
01-24-2021 05:17 PM - edited 01-24-2021 05:21 PM
Greetings,
If this is not a problem with ink delivery / clogged , mis-aligned or defective printhead, I would suggest you have a look at he printers timing strip.
https://support.usa.canon.com/kb/index?page=content&id=ART170551
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
01-27-2021 01:05 AM
First off-sorry for the duplicate post. I didn't see the original post when I checked for replies earlier today.
Rick-thanks for the the link. I think this is likely the issue as I performed all nozzle maintenance tasks previously.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.