Canon Community Canon Community
 


Reply
Highlighted
Occasional Contributor
Posts: 5
Registered: ‎07-05-2018
Accepted Solution

Paper Jammed

Hello, anyone know how to disassemble an MG5750 ? The paper was jammed and has been ripped off. From feed side only 1mm of paper showing and from the underside its ripped off. I can get hold of small pieces with pliers but it is too tight ? I am very interested as to how to get it out.  Surely there is a release mechanism somewhere. Thanks for any help.

Highlighted
Occasional Contributor
Posts: 5
Registered: ‎07-05-2018

Re: Paper Jammed

Resolved. Well I ripped/removed enough paper from the underside of the printer so that it must have gone past some sort of sensor. I plugged the printer in, switched it on and the paper came out on its own.

Highlighted
New Contributor
Posts: 2
Registered: ‎09-22-2020

Re: Paper Jammed

 
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement