12-08-2016 04:16 PM
The cyan color still shows white lines through it on the nozzle check printout.
I have even changed the cartridge to no avail.
suggestions? no improvement shown from one deep cleaning to the next.
Solved! Go to Solution.
12-11-2016 10:26 AM
Hi JC1,
It is recommended that you contact live technical support. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
A Technical Support Representative will be able to resolve this issue faster.
12-11-2016 10:26 AM
Hi JC1,
It is recommended that you contact live technical support. To contact a Technical Support Representative, please use the link below:
http://Canon.us/ContactLI
A Technical Support Representative will be able to resolve this issue faster.
08-19-2020 12:00 PM
For anyone still looking, I really don't know why Canon support doesn't feel able to tell you this:
Removing the print head is easy. Just look for the two clips either side. Soak it in something like Isopropyl Alcohol overnight. Job done - simple. Demos are on Youtube. I would have preferred instructions from Canon and I wouldn't have objected to a disclaimer absolving the company of responsibility.
Hopefully this post won't be deleted!
I hope this helps someone.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.