Canon Community Canon Community
 


Reply
New Contributor
Posts: 2
Registered: ‎10-11-2017

My Maxify MB2320 won't print cyan (blue)

My Maxify MB2320 won't print cyan (blue) after doing two deep cleaning. What should I do next?

Highlighted
Moderator
Posts: 1,176
Registered: ‎10-25-2012

Re: My Maxify MB2320 won't print cyan (blue)

Hi JEPlotner2017!

 

Thanks for reaching out! We recommend getting in touch with our friendly, US-based technical support team for one-on-one assistance with this. They're at 1-800-OK-CANON (800-652-2666) Monday-Friday 8:00 am to 10:00 pm ET and Saturdays 10:00 am to 7:00 pm ET, excluding holidays.

New Contributor
Posts: 1
Registered: ‎01-18-2018

Re: My Maxify MB2320 won't print cyan (blue)

I tried everything, and finally found something that worked for mine--I went into:

Setup.  --then "Device Settings". --then "Reset Settings".  --then "Reset All".

 

Of course, then I had to re-connect to wifi.  But finally this ridiculous little printer will recognize the new ink cartridge.  Mine was a problem with the black. It was because I changed it, before it was completely empty.  It was printing terribly and wasting paper.  Then of course, it wouldn't recognize that it had a new cartridge in it.    I tried ever suggestion out there, and I even took the darn printer apart so I could put in another new cartridge, because it wouldn't slide to where I could access the black ink again.  But that didn't work either. You know I swore that I would never buy another POS HP printer because they act like this, that is why I switched to Canon.  I first bought an MF4800 and I love that one-but it has a toner cartridge and is just black.

 

 

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement