10-15-2018 04:09 PM
My PIXMA 700 printer just started printing 3mm pink bands/bars across my color photos. I've replaced the ink cartridges and checked for bits of plastic over vent holes, etc. I've cleaned the nozzles and print heads all to no avail. Please help. I've had the printer for 10 years now and its always worked perfectly.
Solved! Go to Solution.
10-15-2018 04:24 PM
Hello.
If you are printing on photo paper, make sure that the media type is being specified correctly before printing. If the wrong media type is selected this may cause banding on photo or graphic prints.
If the issue persists, find more help at Contact Us.
10-15-2018 04:24 PM
Hello.
If you are printing on photo paper, make sure that the media type is being specified correctly before printing. If the wrong media type is selected this may cause banding on photo or graphic prints.
If the issue persists, find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.