Canon Community Canon Community

New Contributor
Posts: 1
Registered: ‎04-11-2015


I have code 1312 that i cannot clear, there is no paper stuck in the machine, did anyone run into this before any advice would be appreciated thanks.
Product Expert
Posts: 1,989
Registered: ‎10-17-2012

Re: MX922

Hi jjvjr44,


If you have already verified that paper is not stuck in the unit, please turn off the printer, unplug the power cord and leave it out for at least 5 minutes, then plug it back in and turn it back on.  If the error does not appear, please attempt to perform a roller cleaning on the unit by following the steps located here.  


If you receive an error after performing the roller cleaning, or if you are unable to perform the roller cleaning due to the error reappearing, the printer may require servicing.  Please call or email us using one of the methods on the Contact Us page for further assistance.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement