07-01-2016 01:13 AM
I just replaced my 3-year old MX922 with a new MX922. The old one would stay on, ready to print, continuously. With the new one, the print connection turns off automatically so that I have to hit the "Copy" button aqgain in order to print. Both were/are connected to the computer by cable. Can I fix this so I don't have to continually hit the "Copy" button?
07-05-2016 03:29 PM - last edited on 07-05-2016 03:30 PM by Danny
Hi tedslair,
While your PIXMA MX922 will go into Standby mode after a period of disuse, it should always be available for use regardless of whether it is connected by USB or network. Is the cable you are using Ethernet or USB?
I look forward to your reply.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.