12-23-2018 08:59 PM
The following is happening when I prink from black cartridges under "fast" print. Under High quality print, the problem is NOT present. I have owned four MX 922's over the last 3 years and this problem is from my latest printer fresh out of the box. I have completed all of the maintenence cycles (Clealing, alignment, nozzle check, etc)
Can anyone identify the problem from the photo below?
12-26-2018 10:59 AM
Hi bucktoof,
Troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group at 1-800-OK-CANON (1-800-652-2666)/
We look forward to hearing from you.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.