06-03-2013 03:08 PM
Set up my printer for Wireless & it is communicating to the printer.
Only problem is that nothing prints . . . Goes through the motions of printing but the page is blank.
Any suggestions?
06-05-2013 04:35 PM
Hi mariemanor413,
So we can determine whether this is a hardware or software issue, please print the Nozzle Check on the printer:
1. Make sure one or more sheets of A4 or Letter-sized plain paper are loaded in the Cassette.
2. Open the Paper Output Tray gently, and open the Output Tray Extension.
3. Press the SETUP button.
4. Select Maintenance, then press OK.
5. Select Print nozzle check pattern, then press OK.
6. Select Yes when the confirmation screen appears. The nozzle check pattern will be printed and two pattern confirmation screens will appear on the LCD.
Is there a pattern for PGBK, C, M, Y and BK?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.