03-07-2018 01:15 PM
MX860 stopped printing from the bottom paper tray. I switched to high resolution and printed from the rear tray for a few weeks.
I am out of cyan ink and set it to grayscale, but nothing prints.
I'm running Windows 10 from my home computer
03-08-2018 10:04 AM
Greetings,
Start by replacing any ink cartridges which are empty. Revert back to default settings > Paper tray > Auto select and retest.
If this fails, uninstall the printer and software, restart yor machine and reinstall the printer and driver. Test again.
If this fails, its going to be difficult for anyone not present to try and determine if the paper feeder in the bottom tray on the printer is defective remotely.
~Rick
Bay Area - CA
~R5 C (1.0.6.1) ~RF Trinity, ~RF 100 Macro, ~RF 100~400, ~RF 100~500, +RF 1.4x TC, +Canon Control Ring, BG-R10, 430EX III-RT ~DxO PhotoLab Elite ~DaVinci Resolve ~Windows11 Pro ~ImageClass MF644Cdw/MF656Cdw ~Pixel 8
~CarePaks Are Worth It
03-08-2018 05:02 PM
Thanks, I'll try it.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.