02-17-2019 08:52 PM
My MX532 ADF (automatic document feeder) will no longer work. I've used it a lot with no issue, but it stopped pulling in the paper. I've looked online for troubleshooting, but am not finding anything.
02-20-2019 02:40 PM
Hi Jall70,
To narrow down this issue, we will need to gather some more information. Please reply with the answers to the following:
We look forward to your reply.
Please note: If this matter is time sensitive, please call support at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST.
02-23-2019 08:04 PM
1. Single side scan
2. No Error message on the printer, get a message on the screen that there is a paper jam.
3. Using Windows
4. Yes, paper was jamming. I'd hit OK a couple times and it'd go through.
One odd thing, I went to try again and unknown to me, there was a piece of card stock on the glass.... the ADF worked for about 10 pages. I cleared the jam, tried again and it worked for another few pages.
02-26-2019 01:31 PM
Hi jall70,
I recommend trying to clean the ADF. Please click HERE for the steps.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.