08-17-2018 10:37 PM
I really thought I found a solution after finding out that I could do a Manual Print Head Alingment.
Alas, no.
I've done about 3 auto PHAs, the one where you Print and then take the page to the scanner and hit Start.
Still my output is blurry, I admit that after the Manual Alingment the blurryness got a tad bit clearer (ex: Pre-Manual Print Head Alignment, I printed a sheet with numbers, the at about font size 10-12 but the text and numbers appear to be quadrupled. Post-PHA, now the numbers look like they are down to 2-3 afterimages. minor improvement)
I need to print some important docs and this issue is really making me want to file for RMA.
08-17-2018 10:58 PM
Hi HyeVltg3,
Many print quality issues can be resolved by cleaning the encoder (timing) strip. I have included full instructions for cleaning the encoder HERE.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
08-18-2018 02:06 AM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.