05-01-2019 08:38 AM
The printer has been working OK, showing low ink messages but still printing. Today it won't print shows 'doesn't recognise ink model numbers. I have put in new (Canon) cartridges, correct model numbers, and although it registers ink full it still says it doesn't recognise the ink model numbers and won't print. Help!
05-01-2019 08:56 AM
Hi, vickyt!
Welcome to the Canon Forums!
The Forums aren't intended for immediate assistance. If your question is of an urgent nature, please call our US-based support team at 1-800-OK-CANON (800-652-2666) during normal business hours, or visit our support site for self-help options HERE.
If you're outside of the USA, please click HERE to find your support options.
05-01-2019 03:32 PM
Hi, vickyt,
Could you reply with the information that is on the ink cartridges( ink number, where it was made, etc).
Also after you put the ink back in the printer, I recommend performing a reset of the printer. While the printer is on, unplug the power cord from the printer and let it sit for 60 seconds. While the power is off, press the power button 5 times. After 60 seconds plug the power cord back in and power on the printer. Does the same message appear?
We look forward to your reply.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.