11-09-2017 12:16 AM
After installing macOS 10.13.1 (High Sierra) MP Navigator EX 4.0 has ceased to work.
Solved! Go to Solution.
11-13-2017 02:31 PM
Thanks, Mark. In the elegance stakes, that solution scores zero, I'm afraid! Fortunately, by updating MP Navigator to v4.0.5 and reinstalling the IJ Network Tool in its latest version, all problems with my MG 6150 have been overcome. Took me a couple of hours to sort that out and I would have hoped for an auto-update from Canon, to be honest, but the job's done, thankfully. Hopefully this might help other sufferers.
12-10-2020 03:51 PM
12-29-2017 03:23 PM
I'm having the problem, too. Printer is PIXMA 882.
12-29-2017 03:50 PM
12-29-2017 04:16 PM
Any idea how to get MP Navigator to wortk with Mac OS High Sierra 10.13.2??
12-29-2017 04:22 PM
New folks: Read Back a few pages to catch up
01-03-2018 11:34 AM
MP Navigator 2.1 on Pixma mx320 will not work with OS High Sierra.
When is a software update going to be available so I can use the scan function again?
In the meantime, is there a work-around for this problem?
01-03-2018 01:11 PM
I got my 210 LIDE scanner working with high sierra by following studawg6's directions: I went back to Maverick, and was able to get the MP Navigator 4.0.5 to work. Ugh. Cannon - get this figured out. We shouldn't have to be going to old versions in order to get your software to work with your perifieral equipment.
01-03-2018 02:04 PM
01-03-2018 07:28 PM
I have read through the messages and found that some people have had success going back to 3.1.5. Unfortunately that is not an option if you have an MX882 becuase it isn't supported by 3.1.5. I tried deleting and reinstalling 4.1.3 and 4.1.4 and that didn't work at all.
I'm not a happy Canon right now, but I suspect they don't care...
01-04-2018
11:01 PM
- last edited on
01-04-2018
11:06 PM
by
SamanthaW
I have made numerous responces to this thread and still have no luck in getting my MX 870 to work. Before upgrading to High Sierra MP Navigator 3.1.4 worked fine. Since the upgrade I have tried several versions of MP Nav 4 and Nav 5 as well as trying to download 3.1.5 that several responders have said worked. 3.1.5 is listed for Window only. I can't find a 3.1.5 for Mac and when I try to download the windows version it won't download.
So for me at least the problem still exists and Canon seems to not care. I have sworn off all Canon products as a result. I can get a new printer with less expensive ink from other suppliers. Canon [Removed offensive language per Forum Guidelines. Please remember, if violations to these rules are severe, or they continue after warnings, a user's privileges to the Forum may be suspended for any length of time, up to and including a permanent ban, at the sole discretion of Canon USA.]
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.