08-28-2017 11:50 AM
I have installed a special ICC profile for the correct combination of my MG8150 and the paper I will use (ILFORD Gallerie Smooth Pearl) and selected this ICC as the printer profile. Despite that the printer does not recognise the paper and it just rolles through. When I load the photo paper on the wrong side, the printer prints the image (on the wrong side), so I conclude that it is not the size the printer has a problem with. It does not print any other photo paper (like Canon Photo Paper Plus Glossy) either. The printer prints only on standard paper. I have tried all types of photo papers you can choose from the drop down menu, nothing works. I have also updated the printer driver. NOthing helps. Pls help 🙂
12-06-2017 04:55 PM
Hi Csilla,
In order to better assist you, allow me to ask a couple questions:
I look forward to your reply.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.