Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎03-26-2020

MG5420 Printer with Error Message 2500

When I did an auto head alignment, I got an error code 2500.  I am working from home and really need my printer to be up and running.  Can anyone help me with this problem?

Reputable Contributor
Posts: 858
Registered: ‎11-13-2019

Re: MG5420 Printer with Error Message 2500

Hi kfell108.

 

For the 2500 error code, try the following:

 

  • Check the vents on top of each ink (near the end of the labels). Ensure the brightly colored packaging has been removed, and the vents are unobstructed.
  • Print head nozzles are clogged. Press the OK button to dismiss the error, and print the nozzle check pattern to check the status of the print head.

  • Paper of size other than A4 or Letter is loaded in the cassette (lower). Press the OK button to dismiss the error, then load a sheet of A4/Letter-sized plain paper with the printing side (whiter side) facing UP.

  • The paper output slot is exposed to strong light. Press the OK button to dismiss the error, and then adjust your operating environment and/or the position of the machine so that the paper output slot is not exposed directly to strong light.

  • If the printer recently experienced a paper jam, and printing had become skewed or streaked, check and, if necessary, gently clean the timing strip with a few dry cotton swabs.

  • Turn off the machine and perform Print Head Deep Cleaning after 24 hours.

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement