cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

How to reset my canon pixma mx727 back to the factory settings?

raventitan
Apprentice

Hi

 

ANyone can help?

I stucked at code 1403, though I changed to new printhead and ink cart. Just wanted to use the scanner function.

 

Thanks

1 REPLY 1

James_C
Moderator
Moderator

Hi raventitan       

 

The error is an indication that your PIXMA MX727 is experiencing an internal error.  Please follow these steps to try to resolve this issue:

 1.  Confirm that your PIXMA MX727 is powered on.

 2.  Pull open the paper output tray.

 3.  Lift the scanning unit (printer cover) completely. The print head will move to the replacement position.

 4.  Open the inner cover.

 5.  Remove the ink tanks by pressing the tab of each tank.

 6.  Raise the print head lock lever.

 7.  Tilt the print head slightly towards the front of the machine and lift out gently.

 8.  Place the print head in the print head holder and lower the print head lock lever carefully until you hear a click.

 9.  Insert ink tanks into the print head.

10.  Press the mark <PUSH> on the ink tank firmly until you hear a click.

11.  Ensure that all the ink tanks are installed properly and the ink tank lamps light red.

12.  Close the inner cover and the scanning unit/printer cover.

 

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

              

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements