12-03-2013 04:05 PM
How do I get my MX420 to print out a fax that is in its memory?
12-13-2013 06:31 PM - edited 12-13-2013 06:32 PM
Hello notatechie,
Please try the following procedure to print the documents in memory:
1. Make sure that the machine is turned on.
2. Load paper.
3. Press the FAX button.
The Fax standby screen is displayed.
4. Press the left Function button.
The Fax menu screen is displayed.
5. Select Memory reference, then press the OK button.
6. Use the button to select Print all received documents, then press the OK button.
The confirmation screen is displayed.
7. Use the button to select Yes, then press the OK button.
All the documents in machine's memory will be printed.
Each time a document is printed, the screen to confirm whether to delete the printed document in machine's memory is displayed.
If you select Yes using the button and press the OK button, the printed document in machine's memory is deleted.
We hope this helps!
05-27-2016 02:16 PM
How do I retreive it from my MX492? The direction you give here are not working for me.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.