04-20-2020 01:55 PM
05-05-2020 03:05 PM
Hi SGlinick,
The MX922 can work with WPA-2 so it should be compatible. If you have a new router, the printer would need to be connected to your new network to continue working. You can connect the printer to your network using the steps in the link HERE. Since you are using an EERO router, you can select the option for multiple access points if it comes up.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.