11-11-2017 07:16 AM
Just changed printer from an HP6520 to a Canon TS8150.
With the HP 6520 I was able to scan an A4 page and then whilst still in scan mode select a specific area of the page to scan and copy that specific area into - perhaps, Microsoft Word.
The Canon TS8150 does not as far as I can see offer that option.
Solved! Go to Solution.
01-16-2018 05:11 PM
Hi compumac,
You can define the scan area using IJ Scan Utility.
Only the defined area will be scanned.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
01-16-2018 05:11 PM
Hi compumac,
You can define the scan area using IJ Scan Utility.
Only the defined area will be scanned.
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.