03-01-2017 04:56 PM
Can this printer be set up to print labels? Im trying to figuer out how to set it up to print a 2" X 4" Label sheet. Any help will be great.
03-01-2017 05:08 PM
03-02-2017 04:25 AM
Hi jwjw427,
There is no specific setting within the driver of the Canon MG2520 that will allow you to set it up for printing labels. However, the printer should allow you to print labels if they are on a 8.5 letter size sheet of paper. You will also need a program that allows you to format the labels.
You can use the following page sizes.
Standard sizes:
Letter
Legal
A5
A4
B5
4" x 6" (10 x 15 cm)
5" x 7" (13 x 18 cm)
Envelope DL
Envelope Com 10
Non-standard sizes:
You can print on non-standard size paper within the following ranges.
Minimum size: 4.00 x 6.00 inches (101.6 x 152.4 mm)
Maximum size: 8.50 x 26.61 inches (215.9 x 676.0 mm)
Paper Weight
You can use paper in the following weight range.
17 to 28 lb (64 to 105 g/m2) (except for Canon genuine paper)
If you continue to have difficulties, please contact our support group using the following link:
http://Canon.us/ContactLI
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.