03-01-2021 02:30 PM
My Canon Pixma MX922 is one of my old printers i bought a few years back. In the beggining when i first turned it on it said a code c000 and i didnt know what to do so i ended up opening and clossing the ink carrtigen and it went away. But then when i did that another error came up about a support code 1660 and it said it didnt recognize a ink tray. I need help honestly really tired at this point!
04-02-2021 01:05 PM
Hi Faith2,
The C000 will occur if the print carriage is unable to move. This is typically caused when one of the ink tanks pops up and restricts the movement.
The 1600/1660 error will occur if the printer does not recognize the ink. To clear this error, please replace the ink tank in which the ink lamp is out or blinking or has an "x" over it on the MX922's display.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.