10-27-2013 05:26 PM
Canon PIXMA MP830 not printing. Nozzle check done, printed 6 bands, but afterwards still cannot make a black and white copy. Help?
11-07-2013 04:16 PM
Hi Jhtdfran1978,
When printing the nozzle check pattern, you should see a grid of black at the top of the page above the bands of color. If this grid is missing, and it does not appear after several deep cleanings, then the printhead is likely clogged or damaged. I recommend contacting us for your service options.
05-06-2014 06:23 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.