08-03-2020 04:44 PM
Canon Community,
I am going through way to much ink, but can not seem to change the default printer settings to "grayscale". It seems there are multiple change spots - dial on the printer, system preferences software, and then within each application.
Where do I change to grayscale and how. I see it as an option in a preset, but can not modifiy it, the screen is a view only screen, no editting can occur.
Cheryl
08-03-2020 07:44 PM
Your printer will use all the inks to print grayscale.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.