01-05-2018 01:44 PM
My printer was not printing black at all, so I found some advice in the forum to do maintenance and clean the nozzles. Then did a deep cleaning. Now it prints black just fine, but doesn't now print yellow after doing the cleaning. (It printed yellow before).
Ideas?
05-02-2018 10:18 AM
Hi kjstongca,
When a color is not printing correctly, please open the cover to your PIXMA MG7120 and inspect the ink tanks to make sure they contain ink, replacing as necessary.
Once you know all ink tanks contain ink, please perform 2 or 3 deep cleanings.
If your PIXMA MG7120 still does not print correctly, please contact our support group using the following link:
http://Canon.us/ContactLI
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.