01-26-2019 09:35 AM - last edited on 11-08-2022 09:25 AM by Danny
Hello,
My Cannon MX922 is printing photos with some black sections turning out pink (see attached photo) I have made sure that all ink cartradges are full (replaced all of them), run a test page and run a nozel test (it was clear). I am using the photo paper that the printer came with. My printer does not have this issue when printing onto normal paper. Please advise what steps I should be taking to try and fix this.
Thank you!
01-31-2019 11:20 AM
HI ajvv1989,
Troubleshooting with our support group will be needed to narrow down the cause of your issues. Please contact our support group at 1-800-OK-CANON (1-800-652-2666), Monday - Friday, 8:00 AM - 8:00 PM EST(excluding holidays).
We look forward to hearing from you.
11-06-2022 06:07 AM
I have exactly the same problem. It changed overnight. did you get a solution?
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.