cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Can't set percentage Magnification on MX922

gbuchberger
Apprentice

The Print Settings menu on my MX922 does not include a function to set the Magnification as a percentage, as detailed in the Online Manual.  It only has a few preset magnfications, and not the Legal > Letter function that I need.  Device Settings menu reports the firmware is current at version 3.010.

 

Any suggestions?

 

Thanks.

 

 

3 REPLIES 3

James_C
Moderator
Moderator

Hi gbuchberger,                     

 

Are you feeding the paper from the upper cassette or the lower cassette.  Please click HERE for additional information.

 

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

Hi James,

 

Thanks for the quick reply.

 

I am using the lower cassette.  I need to reduce a legal doc scanned thru the ADF to letter size.  The manual says Fit to Page is not available using the ADF.  I get the same results with Page Size = Letter or Legal.

 

Magnification menu selections are as follows:

Same Size

156% 5x7>LTR

183% 4x6>LTR

400% MAX

Fit to Page

100%

25% MIN

94% A4>LTR

 

-- Greg

Hi again,

 

Please click HERE for information regarding magnifcation options for the PIXMA MX922.

 

If you continue to have difficulties, please contact our support group using the following link:

http://Canon.us/ContactLI

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
Announcements