11-29-2015 09:37 PM
I would like to set my MX922 so that it never turns off after x mins of inactivity. I poked around the printer properties and did not see any way to do this.
Is there any such option to adjust?
Solved! Go to Solution.
12-02-2015 08:36 AM
Hello.
The MX922 does not appear to have an option to power off automatically.
If additional assistance is needed, find more help at Contact Us.
12-02-2015 08:36 AM
Hello.
The MX922 does not appear to have an option to power off automatically.
If additional assistance is needed, find more help at Contact Us.
06-30-2016 03:43 PM
The MX922 INDEED does have a auto power off, as I have to get up from my desk and walk across the room EVERY THREE MINUTES!!! to turn the **bleep** thing back on.
07-02-2016 10:24 AM
LeeGrove.
Troubleshooting with our support group will be needed to narrow down the cause of your issue. Please contact our support group using the "Contact Us" link below for additional assistance.
This didn't answer your question or issue? Find more help at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.