02-13-2016 07:04 PM
While I am trying to focus on a subject why does my Canon ELPH 160 show the message: "Display will turn off. Any operation reactivates"? I cannot focus with a black display, and tapping a button disturbs the focus. I could understand this if the battery were low, but this happens even with a fresh charge. Is there a setting that I can change to disable this message?
Solved! Go to Solution.
02-13-2016 07:12 PM
Yes in your settings menu there is a Power saving setting where you can ajust the time before the display goes blank
Here is the link to your user guide that information is on page 74
http://gdlp01.c-wss.com/gds/1/0300017431/01/elph170is-160-cu-en.pdf
02-13-2016 07:12 PM
Yes in your settings menu there is a Power saving setting where you can ajust the time before the display goes blank
Here is the link to your user guide that information is on page 74
http://gdlp01.c-wss.com/gds/1/0300017431/01/elph170is-160-cu-en.pdf
02-14-2016 01:56 PM - edited 02-14-2016 02:02 PM
Thank you! I figured it out - was the ECO setting that had to be changed first in order for me to access Power Settings.
02-14-2016 02:04 PM
Ok great!
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.