Canon Community Canon Community
 


Reply
New Contributor
Posts: 1
Registered: ‎11-25-2012

canon power shot glph 100 hs will not turn on after inserting battery and memory card

Inserted battery and memory card like instructions said and will not turn on?

jfo
Super Contributor
Posts: 280
Registered: ‎11-12-2012

Re: canon power shot glph 100 hs will not turn on after inserting battery and memory card

Welcome Bobby!

 

Just to double-check, you've let the battery charge for a decent amount of time?  

Product Expert
Posts: 978
Registered: ‎10-16-2012

Re: canon power shot glph 100 hs will not turn on after inserting battery and memory card

Hi Bobby,

I'm sorry to hear that your PowerShot ELPH 100 HS won't power on.

First, please ensure that the battery door is fully seated and in the closed position.

If your camera still won't power on with a fully charged battery inserted.

Unfortunately, your camera will require service to correct this issue.  I regret the difficulty this causes.

The age of your camera and/or the cause of the error will determine your service options.  If the camera is more than one year old, or if the camera was damaged by liquid, sand, or applied pressure or force, it is out of warranty.  We have two options available for out of warranty cameras:  you may participate in the Canon Loyalty Program, or you can send the camera in for repair.  If the camera was purchased less than one year ago, and you have a copy of your sales receipt, the unit can be sent to our Factory Service Center for repair. 

One option you have is the Canon Loyalty Program.  This program allows you to replace your current camera with a refurbished Canon Camera for a discounted fee, and have it shipped via Ground delivery.  The refurbished unit offered through this program carries a 90 day warranty.  The original non-functioning camera would then be returned to Canon USA for recycling using a prepaid shipping label that would be provided.  If you would like to take part in this option, please call our Sales Department at (866) 443-8002 seven days a week, 8am to Midnight.  Let them know you have been working with email technical support and the Canon Loyalty Program was offered.  Be sure to have your serial number for your camera at the time of your call.

If your camera is in warranty, or you prefer to have it repaired, please forward your digital camera to the Factory Service Center shown below.  When shipping your camera, please be sure to remove the memory card and battery.  You are not required to send any accessories or manuals when shipping the camera.  Be sure to include your name, street address (no P.O. boxes, please), telephone number, and a letter describing the issue with the product.

As we do not provide RMA numbers for service, we suggest using a trackable and insurable service (i.e. UPS, Federal Express, Priority Mail) to ship your camera.  Please package the camera very securely to prevent damage during shipment.  Please send your camera to the following address:

 

Canon Factory Service
12022 Canon Boulevard
Newport News, VA 23606

 

Upon arrival at the Factory Service Center, your camera will be logged in to our repair database and assigned a repair number.  Next, the camera will be visually inspected and you will be advised of the findings.
 
A written estimate will be sent to you at the address that you have provided.  The repairs to your camera will not begin until you approve this estimate and make payment arrangements.  If, after receiving the estimate, you do not wish to have the camera repaired, please inform the Factory Service Center of your decision as soon as possible.  If you decline the estimate, the camera will be shipped back to you unrepaired.

When the repairs are complete, the camera will be shipped back to you via Federal Express or UPS.  The length of time for the repair will be dependent upon the nature of the repair and availability of parts, if needed.  Usually, repairs are completed within approximately seven to ten business days of payment.

Once you have confirmed with your shipper that the camera has been delivered, you are more than welcome to contact us for repair updates.  Please include your name, address, and telephone number, as well as the serial number of the camera, in all repair status inquiries. 

For non-warranty repairs, the standard labor cost to make the repair is $119.00.  Parts may be an additional cost.  Cameras damaged by liquid, sand, or applied pressure or force may have a considerably higher repair cost, depending on the results of the Factory Service Center's evaluation.

Richard

Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
powered by Lithium

LIKE US on Facebook FOLLOW US on Twitter WATCH US on YouTube CONNECT WITH US on Linkedin WATCH US on Vimeo FOLLOW US on Instagram SHOP CANON at the Canon Online Store
© Canon U.S.A., Inc.   |    Terms of Use   |    Privacy Statement