11-03-2016 11:28 AM
Bought the camera from Canon refurbished. Have had the camera over a year with no problem but recently noticed the ISO settings will only show going from ISO 320 to upper limit of ISO 1600. The manual shows it should be from ISO 80 to ISO 6400. ANy ideas?
11-03-2016 11:45 AM
Check your camera settings and the shooting mode(s) that you are using. It sounds like you have ISO set to automatic, which can behave differently in different shooting modes.
11-03-2016 02:33 PM
Thanks for the reply Waddizzle! I have checked all settings against the working SX50 and all seems to be in order.
Not using auto-iso and in manual mode. I am at the point of going to try and reset to default values. Other than that I would suspect a Firmware problem.
10-04-2020 10:11 PM
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.