06-18-2013 01:49 AM
Following the users guide, pressed FuncSet but only 4 image ratio options show up, unlike the guide pix which shows JPEG and RAW. Any suggestions on what's up? I need RAW and bought camera for that reason. Thanks a bunch.
Solved! Go to Solution.
06-18-2013 02:27 AM - edited 06-18-2013 02:30 AM
After you press function set, you need to choose the jpeg option first (the L see manual page 41) then the option to choose RAW and RAW+Jpg show up (see manual page 146).
========
Want to thank me? Give me a kudo...it makes me happy.
06-18-2013 02:27 AM - edited 06-18-2013 02:30 AM
After you press function set, you need to choose the jpeg option first (the L see manual page 41) then the option to choose RAW and RAW+Jpg show up (see manual page 146).
========
Want to thank me? Give me a kudo...it makes me happy.
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.