12-07-2013 12:37 PM
I can set my metering, but every time the camera shuts off it goes back to "evaluative". Is there a way to lock the settings so that spot metering can stay on until I change it?
12-07-2013 09:31 PM
Hi JackieL.
I have the same issue with the SX150 and the G12, although if I leave the cameras in center weighted metering, that seems to stay even after the camera is turned off and back on.At least with the G12 I have two custom setups that I can set to have my most used settings. Pretty frustrating because my old A510 holds the spot metering just fine.
If I come across a solution I'll be sure to let you know.
Smack53
12-11-2013 11:07 PM
Hi JackieL,
This is normal for this camera. The PowerShot SX260 HS does not retain the metering settings when you turn it off.
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.