06-16-2016 10:34 AM
06-16-2016 10:42 AM
Even after turning the camera on and off? Have you tried pushing the shutter halfway down?
What have you tried?
06-16-2016 01:07 PM
06-16-2016 03:48 PM - edited 06-16-2016 03:51 PM
You should be able to get back to the shooting mode by holding the shutter button halfway down as was suggested.
Try pressing the Menu button on the bottom right corner in the back of your camera.
Then hopefully you can go to the Settings menu, hammer and wrench symbols, then find the Reset All...that will reset everything back to defaults and perhaps correct your issue...make sure your in a basic shooting mode like Auto or Program (P) on the top dial too
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.