01-03-2013 03:40 PM
01-10-2013 07:10 PM
Hi Chamberlin,
You may adjust the size and data volume of an image according to the purpose of use by changing the recording pixels and compression ratio of the image. For example, you increase the recording pixels when you want to print the image on a large piece of paper, and decrease them when you want to attach the image to your email. To do so:
1. Turn your camera on in the shooting mode.
2. Press the <FUNC./SET> button and scroll down to the "L" (This may have changed to "M1", "M2", etc). Press the right <directional button> to display the list of recording pixels.
3. Select a recording pixel setting of your choice. Operate the <directional buttons> up or down to select the recording pixel setting you want to change to. After making a selection, press the left <directional button>.
After making the selection, press the <FUNC./SET> button.
I hope this helps,
Richard
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.