01-22-2020 11:23 AM
I have Power Shot S80. Took this picture in daytime The room was not dark. Need to know what the camera setting should have been for a scene like this.
Solved! Go to Solution.
01-23-2020 01:25 PM
@Need2know wrote:What about shooting mode, ISO settings, flash on or off with ISO settings???
As we have said, your camera cannot capture this image because it cannot capture the range from the bright outside to the dim inside. Any change to settings can only move the captured brightness range, not increase it.
The only way is to take multiple exposures and combine them in post. In this case it would be relatively easy to cut out the window from an exposure that properly exposes it, and plops it into an image that properly exposes the rest of the room, no HDR software required.
01-22-2020 12:43 PM
01-23-2020 12:47 PM
????
Could you be more specific?
01-22-2020 02:26 PM
No single setting will do it. You do not have the dynamic range for the shot. You have 3 choices:
HDR, as already mentioned, where you take multiple shots at different exosures.
Expose for outside the window, and leave the room darker than it is now.
Expose for the room and blow out the window.
01-22-2020 05:29 PM
OR you use a flash to light the room to a similar brightness as the outdoor scene.
01-23-2020 11:22 AM
But be aware of flash reflections from the window.
01-23-2020 12:34 PM
@cicopo wrote:OR you use a flash to light the room to a similar brightness as the outdoor scene.
This is tough to do with a camera mounted Speedlite. Making the lighting look natural should require multiple studio strobes.
01-23-2020 12:44 PM
Thanks, I did try that, but it also washed out some of the details from the view out of the window.
01-23-2020 12:45 PM
@Need2know wrote:Thanks, I did try that, but it also washed out some of the details from the view out of the window.
What did you try to do?
01-23-2020 12:53 PM
I tried this:
OR you use a flash to light the room to a similar brightness as the outdoor scene.
12/05/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.2
09/26/2024: New firmware updates are available.
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.