02-15-2015 12:58 AM
Powershot SX510 HS automatically stops recording video after 10 - 15 minutes on continuous recording. Is there a way to turn this off? I would like to record videos until either I press the stop recording button, or the battery gets low. I have turned off all the power saving setting, at least I think I have.
Solved! Go to Solution.
02-15-2015 08:12 AM
The camera has some recording limitations as all the Canon models do. Below is how you can extend your recording times to a max of about 1 hour but there is a 4BG limit regardless so once it hits 4GB the recording stops and has to be restarted.
Also the memory card needs to be at least a Class 6 rating or the recording will stop sooner regardless of the clip size.
This is from page 161 of your manual
02-15-2015 08:12 AM
The camera has some recording limitations as all the Canon models do. Below is how you can extend your recording times to a max of about 1 hour but there is a 4BG limit regardless so once it hits 4GB the recording stops and has to be restarted.
Also the memory card needs to be at least a Class 6 rating or the recording will stop sooner regardless of the clip size.
This is from page 161 of your manual
02-18-2015 09:58 PM
Thank you that clears up a lot. I am reaching the 4GB limit. I did find it in the manually exactly where you said it was. Thank you again.
02-19-2015 10:13 AM
Your welcome !
09/26/2024: New firmware updates are available.
EOS R5 Mark II - Version 1.0.1
EOS R6 Mark II - Version 1.5.0
07/01/2024: New firmware updates are available.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.