cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

No volume on TV when I connect SX70 HS via HDMI and play a video

kshastry
Apprentice

Hi, when I connect my SX70 HS to TV via HDMI and play a video I don't get any sound on TV. This used to work earlier, so I am confused. I don't see any specific setting for this either in the camera or TV. Any help on this is highly appreciated.

2 REPLIES 2

kvbarkley
VIP

The manual says nothing at all about sound over HDMI.

You can try a different cable, but it could be that your HDMI port is damaged. This can happen if you put too much strain on it.

Mark35mmF2
Product Expert
Product Expert

hi there,

 

one thing i would check is that the playback volume is turned up. When you start to playback a clip use the up and down arrows on the camera to adjust the volume. Otherwise I'm not sure exactly what might be causing that but it would also be good to confirm you can hear audio when you play the clip just on the camera if you have not done so already.

Announcements
01/18/2023: New firmware version 1.1.1 is available for EOS R6 Mark II
01/09/2023: Help ensure your autofocus is properly aligned with a Canon Precision Alignment
01/03/2023: Welcome to CES 2023!
12/08/2022: New firmware version 1.0.5.1 is available for EOS C70
12/07/2022: New firmware version 1.7.0 is available for EOS R5
12/07/2022: New firmware version 1.7.0 is available for EOS R6
11/22/2022: New firmware available for EOS R3, EOS R7 and EOS R10
11/16/2022: We're thrilled to be ranked among the Best Employers for Veterans in 2022 by Forbes.
08/31/2022: New firmware version 1.1.1 is available for RF 70-200mm L IS USM
08/09/2022: New firmware version 1.2.0 is available for CR-N 300
08/09/2022: New firmware version 1.2.0 is available for CR-N 500
07/14/2022: New firmware version 1.0.1 is available for CR-X300
06/10/2022: Service Notice:UPDATE: Canon Inkjet Printer continuous reboot loop or powering down
06/07/2022: New firmware version 1.3.2 is available for PowerShot G7 X Mark III
05/31/2022: Did someone SAY Badges?
05/26/2022: New firmware version 1.0.5.1 is available for EOS-C500 Mark II
05/26/2022: New firmware version 1.0.3.1 is available for EOS-C300 Mark III
05/10/2022: Keep your Canon gear in optimal condition with a Canon Maintenance Service
05/05/2022: We are excited to announce that we have refreshed the ranking scale within the community!
04/26/2022: New firmware version 1.0.1.1 is available for EOS R5 C
03/23/2022: New firmware version 1.0.3.1 is available for EOS-C70
02/09/2022: Share Your Photos is back!
02/07/2022: New firmware version 1.6.1 is available for EOS-1DX Mark III
01/19/2022: READY FOR ANYTHING EOS-R5 C
01/13/2022: Community Update. We will be retiring the legacy profile avatars on 01/20/2022. Click this link to read more.