06-28-2021 12:38 AM
Hi, when I connect my SX70 HS to TV via HDMI and play a video I don't get any sound on TV. This used to work earlier, so I am confused. I don't see any specific setting for this either in the camera or TV. Any help on this is highly appreciated.
06-29-2021 04:21 PM
The manual says nothing at all about sound over HDMI.
You can try a different cable, but it could be that your HDMI port is damaged. This can happen if you put too much strain on it.
06-30-2021 01:21 AM
one thing i would check is that the playback volume is turned up. When you start to playback a clip use the up and down arrows on the camera to adjust the volume. Otherwise I'm not sure exactly what might be causing that but it would also be good to confirm you can hear audio when you play the clip just on the camera if you have not done so already.
05/31/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.1.2
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 126.96.36.199
PowerShot SX420 IS - Version 188.8.131.52
PowerShot 620 HS - Version 184.108.40.206
PowerShot SX720 HS - Version 220.127.116.11
PowerShot G1X Mark III - Version 18.104.22.168
PowerShot G7X Mark II - Version 22.214.171.124
PowerShot G9X Mark II - Version 126.96.36.199
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.