08-24-2015 04:17 PM
My zoom does not run smoothly - it always goes in or out no half way measures. does anyone else have this problem or is it a fault on my camera?
08-24-2015 07:32 PM
Do you mean it doesn't stop if you remove finger from zoom actuator?
08-24-2015 09:45 PM
I own 2 of the SX50HS's and I dont have that problem nor have I seen it reported till now.
If your camera is still under warranty I would call Canon asap.
In the meantime you can try removing the battery and holding down the power button for about 30 seconds then try it you can also try a reset to defauls thru the settings menu
05/18/2023: New firmware updates are available.
EOS Rebel T100 - Version 1.1.0
EOS 5D Mark IV - Version 1.4.0
EOS 6D Mark II - Version 1.2.0
PowerShot Elph 360HS - Version 22.214.171.124
PowerShot SX420 IS - Version 126.96.36.199
PowerShot 620 HS - Version 188.8.131.52
PowerShot SX720 HS - Version 184.108.40.206
PowerShot G1X Mark III - Version 220.127.116.11
PowerShot G7X Mark II - Version 18.104.22.168
PowerShot G9X Mark II - Version 22.214.171.124
04/20/2023: New firmware version 1.4.1 is available for EOS R3
03/30/2023: New firmware updates are available.
EOS 1DX Mark III- Version 1.7.1
Speedlite EL-1 - Version 1.0.2
03/30/2023: Product Advisory for EF50 F1.2 L USM
03/30/2023: Product Advisory for EOS R10
2/07/2023: New product announcements!EOS R8 EOS R50RF-S55-210mm F5-7.1 IS STMRF24-50mm F4.5-6.3 IS STMRF15-30mm F4.5-6.3 IS STM
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.