cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

I have a G15 camera. The mode dial does not correspond to the monitor screen, in some instances.

MikePeel
Apprentice

For example P on the mode dial shows M on the screen, TV is Auto, AV is auto, M is C1. The rest are Ok.

I could use C1 and C2 to ape P and TV. Is this a software/firmware problem?

2 REPLIES 2

Waddizzle
Legend
Legend

You should probably contact Canon Service.  It sounds like your camera is either malfunctioning, or that the label plate on your mode dial switch has come loose, and has rotated into an incorrect position.  In the case of the latter, the plate is likely about to fall off and get lost.

--------------------------------------------------------
"The right mouse button is your friend."

jrhoffman75
Legend
Legend

Since the problem doesn't seem like a simple offset (i.e. each setting off by one on the dial) it could be an electronic problem in the camera. If you tried restting all functions (pg 231 of manual) and that didn't correct problem it sounds like service is required.

John Hoffman
Conway, NH

1D X Mark III, M200, Many lenses, Pixma PRO-100, Pixma TR8620a, Lr Classic
Avatar
Announcements