cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Canon S-100 forgets date and time each time it's turned off.

Masher
Apprentice
Hello, I have a canon S-100 that forgets the date and time each time it's turned off. I see chat rooms that talk about if the internal battery is shot. The S-100 will loose date/time if the battery is removed. My S-100 asks for date/time every time I turn it on without touching the battery. Has anyone come across this issue?
3 REPLIES 3

John_
Authority

The S100 has a built in rechargable battery that runs out after a few weeks of non use and no battery inserted. You can also set it to automatically update via GPS as shown on page 115. I attached a portion of  page 21 from the user manual to explain it better.

 

date time.JPG

RogerR
Apprentice

I have two issues.  As long as the camera battery is charged, the Date and Time will stay updated.  My issue is a fully charged camera battery (I have 3) will die within 24 hours of placing it in my camera.  My camera will not start up.  When I replace the battery with another one fully charged, the Date and Time is lost.  No two weeks of remembering the Date and Time as mentioned by Canon. My camera is usable after inserting a charged camera, resetting the Date and Time, then using the camera as needed.  When I turn the camera off for a while, then turn it back on, the camera battery shows as plenty of power.  If I try it the next morning, it is dead.  This happens even when the auto Date and Time with GPS is disabled.

It sounds like the built in rechargeable battery for the date and time in your camera is shot. That battery is not user repalceable as far as I can tell. Have you tried calling Canon to see what they would charge to replace that battery although it might be built in to one of the circuit boards. Which could mean a pricey repair.

 

How old is your camera ?

Avatar
click here to view the gallery
Announcements