08-03-2014 04:23 PM
I've literally installed 3 different print heads (all with exact result), and all new ink. The ink is some cheap knock off stuff, but they're obviously full. Could this issue be the printer hardware itself, or is that not possible?
This is the screen image
This is what prints (the exact result on each print head):
08-06-2014 04:41 AM
Hi joehud,
If using 3 different printheads in your PIXMA iP6000D does not get your printer to print correctly, it would appear as though your PIXMA iP6000D would require service.
To obtain your service options, please contact our support group using the following link:
http://www.usa.canon.com/cusa/consumer/standard_display/contact_us_consumer
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.