03-09-2019 03:25 AM
I had a Pixma iP7220 that died last week and I now have a new TS702. Before I try to install the new one I would like to remove all the software from the old one. What would be the procedure for this?
03-12-2019 01:40 PM
Hi tristatesteam,
So we can best assist you, please let us know version of Windows or Macintosh is installed on your computer?
We look forward to your reply.
03-13-2019 12:31 AM
Windows 7 64 bit
03-15-2019 02:24 PM
Hi tristatesteam,
You will want to open View Devices and Printers and right click on the IP7200 series printer icon and select remove device. Once the printer is removed from there, go to add or remove programs and scroll down until you see Canon ip7200 series driver and remove that as well. After the printer icon and driver is removed, you can restart you computer and the IP7200 series printer will be gone.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.