02-24-2014 01:49 AM
I printed a shipping label as my ink was on its last leg, it came out screwy, so I went ahead and replaced both cartridges as they needed. Still screwy (lines off), tried auto alignment and kept getting a paper jam (for no discernible reason - everything else goes through fine), tried half a dozen manual alignments, tried cleaning the ink absorbing pads, what else can I do?
03-15-2014 08:55 PM
Hi vrs,
When inks do not print correctly, we recommend performing at least one cleaning and two deep cleanings on the unit to try and resolve the issue. If the inks still do not print correctly and both automatic and manual print head alignments also do not resolve the issue, the printer will require servicing. Please Contact Us for your servicing options.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.