12-03-2014 06:42 PM
I just replaced my black ink cartridge in my MX430, and the old one was leaking. Now I have white lines across the page every 6-7 lines of type. Any ideas? No lines in my color printing, just the black.
--Robert
12-08-2014 07:47 AM
Hi Robert,
Performing a print head alignment on the printer may fix the printing issue. To do this, please follow the steps located at the link below:
If the issue still occurs after the alignment, please try cleaning the encoder film of the printer by following the steps at the link below:
Hope this helps!
This didn't answer your question or issue? Please call or email us at one of the methods on the Contact Us page for further assistance.
01-12-2019 04:04 PM
white verticle lines about every 3/8 of an inch
01-12-2019 04:05 PM
white horizontal lines about every 3/8 of an inch
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.