05-01-2020 01:18 PM
I am using a Canon iP8750 and around 1 in 3 prints are ruined by dust (ink not hitting the paper so leaves a white spot).
I am trying to be as careful as possible, keeping the paper boxed and loading just before printing. I am also inspecting the paper and using a dust blower shortly before the paper goes through to try and remove anything but it still happens.
How can I eliminate this?
Thanks
05-01-2020 03:53 PM
Hi jamiek,
The IP8750 is neither sold nor supported in the U.S.A. You've reached support for Canon U.S.A. If you require support outside the U.S., I recommend contacting the branch of Canon for your region. You may find the correct website using the map on the Canon Global website: http://global.canon/en/support/
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.