05-14-2014 05:32 PM
I am testing the ability of using a Bluetooth connection for printing purposes in an office environment. I have an iP100 printer connected to a Windows 7 64-bit laptop via a bluetooth connection. When I print a document, I only get half of the document printed before the printer stops. The printer and laptop are within 1 ft. of each other. I am using drivers from the Canon site.
Any thoughts would be helpful.
06-20-2014 05:19 PM
Hi tony_c525,
So we can better assist you, please reply with the following information:
1. Do you have the bluetooth unit connected to the inside USB port or outside USB port on the printer?
2. Are there any other wireless devices inbetween the printer and computer? If so, if you remove the devices, do you receive a complete printout?
We look forward to hearing from you!
If this is a time-sensitive matter, additional support options are available at Contact Us.
04/16/2024: New firmware updates are available.
RF100-300mm F2.8 L IS USM - Version 1.0.6
RF400mm F2.8 L IS USM - Version 1.0.6
RF600mm F4 L IS USM - Version 1.0.6
RF800mm F5.6 L IS USM - Version 1.0.4
RF1200mm F8 L IS USM - Version 1.0.4
03/26/2024: New firmware updates are available.
EOS 1DX Mark III - Version 1.9.0
12/05/2023: New firmware updates are available.
EOS R6 Mark II - Version 1.3.0
07/31/2023: New firmware updates are available.
Canon U.S.A Inc. All Rights Reserved. Reproduction in whole or part without permission is prohibited.