save toner on and off on a MF 733

[etp]

Save toner on on my MF 733 prints a bearly readable print. Off is awesome. It just started doing this so I assumed the carts were empty. Put in new carts and it did the same thing.

Anyone else?

[Patrice]

Hi etp.

Please perform a a gradation adjustment of the copy setting, and then try the toner saver mode again. To perform the adjustment, please follow the steps below:

1. Select <Menu> in the Home screen.

2. Select <Adjustment/Maintenance> <Adjust Image Quality> <Auto Adjust Gradation>.

3. Select <Adjust Copy Image>.

4. Check that the size and type of paper displayed on the screen is loaded in the machine, and select <OK>.

5. Confirm the procedure, and select <Start>.

An adjustment image is printed.

6. Open the feeder after the screen displayed during printing disappears.

7. Place the adjustment image on the platen glass.

• Place the adjustment image with the print side facing down while checking that the black stripe is placed on the back side of the machine.

8. Gently close the feeder.

9. Select <Start Scanning>.

The adjustment image is scanned and adjustment starts.

10. When a message appears notifying that adjustment is complete, open the feeder, and remove the adjustment image.

11. Gently close the feeder.

If the issue persists, or you need any further assistance, please call us at Monday - Friday 10:00 a.m. to 6:30 p.m. ET (excluding holidays).